Bird Ban Gel

Bird Repellent Gel


Bird Ban Gel repels common nuisance birds such as pigeons, mynahs and sparrows without doing them any harm.

It is non-acidic, non-toxic long-lasting weather-resistant gel that is clear and near-invisible.

Bird Ban Gel does not harm birds, its tacky consistency makes birds feel uncomfortable. As a result, it discourages them from roosting and nesting. 

Use wherever birds are a menace or health hazard: outdoor cafes, food courts, building facades, ledges, roof beams, sills.

Coverage: 2-3 sq m per litre.

Any questions?
Code: BBG

Are you a reseller or retailer? – Click Here
Are you looking for bulk or contract pricing? – Click Here

SDS Download


Bird Ban Gel is a non-acidic, non-toxic gel coating that is clear and is almost invisible to the naked eye. It repels common nuisance birds such as pigeons, mynahs and sparrows without doing them any harm.

Its tacky formulation makes birds feel uncomfortable and discourages them from perching, roosting or nesting, which in turn prevents their highly acidic droppings from damaging and contaminating property.

Packaged in an easy-to-use pail, long-lasting and weather resistant.
Apply in areas where birds are a menace or a health hazard.

Ideal for:

  • Outdoor cafes
  • Food courts
  • Building facades and ledges
  • Factory and warehouse roof beams
  • Sills and anywhere birds are a problem

Bird Ban Gel is easy to apply with a putty knife or similar and can last for many months.

Coverage is 2 to 3 sq m per litre.

Most suitable for flat surfaces that will not exceed 40°C.

In colder climates, you may prefer our Bird Ban Liquid for its lower viscosity and easier application.

We recommend you use our Bird Droppings Remover to clean the affected area before you apply Bird Ban Gel.

Related pest control products:

Customer Experience – HammonCare

When I was told about the Bird Ban product it sounded like the exact product we required.

Despite my reservations that the product would work, it has stopped our bird problems overnight.

I thoroughly recommend Bird Ban as a quick, effective and cost-effective way of removing your bird problems with a minimum of harm to your property or the birds themselves.

Grant Harkin

Read more

Directions for use

Dilution: Do not dilute.

Initial Application:

  1. Clean the surface to be treated, including removing bird dropping build up.
  2. Ensure the surface is dry before applying. Apply a thin layer using a putty knife or similar to level surfaces that will not exceed 40°C.
    Avoid applying the product within 10mm of the edge.
  3. Clean up with a solvent cleaner.


As this product is exceptionally tacky, it will collect dust and other debris from the environment. This contamination can reduce its effectiveness over time.

  1. Use a putty knife or similar to scrape off the contaminated product.
  2. Use a solvent cleaner to remove any product that has spread into the 10mm edge area.
  3. Reapply the product in accordance with the Initial Application instructions.

Note: The product may be used on mildly sloping surfaces and in areas where surface temperatures could exceed 40°C; however, there is a risk of some unwanted spreading.


<ul><li><a href=” – Compliance Label.pdf” target=”_blank” rel=”noopener”>BBG – Compliance Label</a></li></ul>

You may also like…

SDS Info


    Company Name:

    First Name*:

    Last Name*:

    Phone No:


    • Please check the that the details above are correct before submitting.

    • A link to the SDS will be sent to the email address supplied above.

    • If not received within a few minutes, please check your Junk mail.