Silicone Remover

Silicone Solvent

$40.00$336.00

Silicone Remover is a silicone solvent that removes silicone from all types of glass, metal, tile, wood or masonry surfaces.

It is also widely used in prepping the surfaces of new works prior to sealing.

Any questions?
Code: SRE

Are you a reseller or retailer? – Click Here
Are you looking for bulk or contract pricing? – Click Here

SDS Download

Description

Silicone Remover is a silicone solvent formulation used to remove silicone from all types of glass, metal, tile, wood or masonry surfaces.  However, it is also widely used in prepping the surfaces of new works prior to sealing.
 
Silicone sealants are widely used to seal joints and abutting surfaces. It is highly effective, inexpensive and easy to apply. However, when the seal does eventually breakdown, or become discoloured as is frequently the case in bathrooms, then it will need to be replaced. 
 
Using a sharp metal blade, cut the silicone sealant as close to the substrate as possible. Take care not to damage the surfaces. You can then use a flat chisel to remove the bulk of the remaining sealant. Hard rubbing with a clean cloth can peel the remaining silicone away from high gloss surfaces like glass and tiles.
 
Once you are satisfied that you have removed as much sealant through mechanical means as possible, it is time to use a silicone solvent. Silicone Remover will easily remove any remaining silicone and prepare the surface for the new sealant. 
 
Ideal for:
  • Glass
  • Metal
  • Tiles
  • Wood
  • Masonry
  • Ceramics
  • Porcelain
  • Grouts

Directions for use

Dilution: No dilution is required.

Removal of silicone from surfaces

  1. Apply by spray or brush.
  2. Allow to dwell for approximately 30 seconds.
  3. Remove silicone and excess remover with a cloth, using a scrapper where necessary.

Replacing mouldy silicone

  1. Remove any excess silicone with a sharp knife.
  2. Lacerate the remaining silicone surface before applying Silicone Remove.
    This will accelerate the process.
  3. Apply by spray or brush.
  4. Allow to dwell for at least 30 seconds.
  5. Remove silicone using a scrapper and cloth.
  6. Treat the affected area with our Algae Died B to kill mould and algae.
  7. Allow the area to thoroughly dry.
  8. Reapply silicone.

Downloads

You may also like…

SDS Info


    Product:

    Company Name:

    First Name*:

    Last Name*:

    Phone No:

    Email:

    • Please check the that the details above are correct before submitting.
    • A link to the SDS will be sent to the email address supplied above.
    • If not received within a few minutes, please check your Junk mail.