Proton | Surface Treatment Chemicals

Proton

$70.00 ex GST ($77.00 inc GST )

Blend of nitric and phosphoric acids with low-foam surfactant. The final polishing step for dairy and food plant CIP operations. Use after caustic cleaning for all heat-exchange equipment. Should be dosed automatically.
⋆ Complies with HACCP and GMP guidelines
⋆ Suitable for use in all Australian food manufacturing plants

Container Type: Black plastic drum

Code: PROUU8045TF015LTP Category: Tag:

Description

Proton is used to remove calcium, corrosion and other inorganic contaminants. It is generally used as a final polishing step for dairy,  brewery winemaking and food plant CIP operations.

In food plant cleaning operations, it should be used after all heat-exchange equipment has been cleaned with a suitable caustic cleaning agent, such as our Singlex or Sledge.

For economical and consistent results, Proton should be dosed automatically via conductivity or flowmeter control methods.

  • Blended acid
  • Contains surfactants
  • Less corrosive
  • Removes residual oils
  • Quick-rinsing
  • Made in accordance with HACCP and GMP guidelines
  • Suitable for use in all Australian food manufacturing plants

Directions for use

Following a caustic clean for heat-exchange equipment in food processing plants:
  1. Use at concentrations of 0.2% to 1.6%, depending on the level of soiling, process run time and temperatures.
  2. Circulate for 15 to 30 minutes at 60°C to 80°C.
  3. Thoroughly rinse with potable water.
Removing calcium and corrosion from surfaces:
  1. Use at a concentration of 10% and spray onto the surface with calcium build-up or corrosion.
  2. Allow to dwell for 5 minutes.
  3. Thoroughly rinse with potable water.

Downloads

SDS Download

You may also like…

Related products

SDS Info

    • Please check the that the details above are correct before submitting.
    • A link to the SDS will be sent to the email address supplied above.
    • If not received within a few minutes, please check your Junk mail.