Aqua Purge

Directions For Use

BOOM SPRAYS: Routine Cleaning:

1. Prior to spraying or between spray sessions, dilute 1 litre of Aqua Purge concentrate in 100 litres of water.

2. Flush 10 litres of this mixture through each nozzle.

3. Allow it to sit for up to 30 minutes.

4. Repeat the process.

Decontamination of Stubborn Residues:

1. For hard-to-clean residues, dilute 3 litres of Aqua Purge concentrate in 100 litres of water.

2. Flush 10 litres of this mixture through each nozzle.

3. Allow it to sit for up to 30 minutes.

4. Repeat the process.

Final Rinsing:

1. After using Aqua Purge, thoroughly rinse all equipment with clean water.

FOAM GENERATOR UNITS:

1. Dilute 3 litres of Aqua Purge concentrate in 100 litres of water.

2. Operate the unit for up to 30 minutes with the solution.

3. Rinse the unit with clean potable water.

4. Remove all filters and screens, rinse them off, and replace them.

KNAPSACKS AND BACK MISTERS:

1. Dilute 50ml of Aqua Purge concentrate in 5 litres of water.

2. flush the solution through the knapsacks and back misters.

ORCHARD SPRAYERS:

1. Dilute 3 litres of Aqua Purge concentrate in 100 litres of water.

2. flush the solution through the orchard sprayer system.

AIRCRAFT:

1. Dilute 2.5 litres of Aqua Purge concentrate in 50 litres of water.

2. flush the solution through the aircraft system.

GENERAL PRECAUTIONS:

⦁ Before handling the product, wear appropriate personal protective equipment (PPE) such as gloves and safety goggles.

⦁ Avoid direct contact with skin and eyes. If contact occurs, rinse immediately with plenty of water and seek medical attention if irritation persists.

⦁ Use Aqua Purge in a well-ventilated area to prevent inhaling fumes or vapours.

⦁ Keep Aqua Purge out of reach of children and pets. ⦁ Store the product in a cool, dry place, away from direct sunlight and heat sources.

⦁ For detailed safety information and emergency procedures, refer to the product label and Safety Data Sheet (SDS).