Anti-microbial CIP Sanitiser

$138.00 ex GST ($138.00 inc GST )

Effective against a wide spectrum of microbiological contaminations: bacteria, yeasts, moulds, fungi, viruses. Sanitises degreased and precleaned CIP stainless steel or glass equipment.

May also be used on floors, walls and airborne. Used widely in food and beverage processing and production, breweries and wineries.

Any questions?
Code: PRX-XU-5-100-SF-020-LTP

Are you a reseller or retailer? – Click Here
Are you looking for bulk or contract pricing? – Click Here

SDS Download


Proxitane is used as a biocide to sanitise degreased and pre-cleaned processing, transfer and storage plant in stainless steel or glass. It can also be used on floors and walls.

Proxitane is low-foaming and ideal for use in clean-in-place (CIP) systems. Peracetic acid, the active compound in Proxitane, is among the most powerful known biocides. It is effective against a wide spectrum of microbiological contaminations including aerobic and anaerobic bacteria and their spores; yeasts, moulds, fungi and their spores; and viruses. It is extremely rapid in its action at ambient temperatures.

In food and beverage processing and production, use Proxitane in the regular cleaning cycle of syrup make-up plant, treated water carbonators, fruit crushing, juice concentrators and reconstitutors, food or condiment cookers and processors, transfer pipes and pumps, bottling, packaging and canning machines.

In breweries and wineries, use Proxitane in regular plant cleaning in fermentation and brewhouses, clarification and filtration plant, tank farms and bottling cellars.

Directions for use


Proxitane concentrate should be diluted with potable water at a rate of variously 1 part to 100 parts water down to 1 part to 500 parts water giving 500 ppm to 100 ppm of peroxyacetic acid in the working solution.

The actual dilution used depends on the class of contaminating micro-organism and the efficiency of plant precleaning.

Additional directions:

Peroxyacetic acid sanitation is most efficient at pH<7, hence the need to rinse out the alkali. The ph of a 1: 100 dilution of Proxitane® is about 3.2 and a 1:500 dilution about ph 4.0. Working solutions should be used at ambient/warm (20 – 40oC) conditions.

Directions for use:

  1. Hot water rinse until rinsing clear 5-10 mins
  2. Hot caustic/detergent rinse 10-30 mins
  3. Coldwater rinse until rinsing is pH7 5 mins
  4. Proxitane® rinse at appropriate dilution 10-30 min


You may also like…

SDS Info


    Company Name:

    First Name*:

    Last Name*:

    Phone No:


    • Please check the that the details above are correct before submitting.
    • A link to the SDS will be sent to the email address supplied above.
    • If not received within a few minutes, please check your Junk mail.