Bird Ban

Bird Deterrent

$60.00$213.00

Bird Ban repels common nuisance birds such as pigeons, mynahs and sparrows without harm them.

This well-known bird deterrent is a non-acidic, non-toxic long-lasting weather-resistant clear and near-invisible coating.

Bird Ban products don’t harm the birds, instead, its tacky consistency makes birds feel uncomfortable when they stand on it. As a result, it discourages them from roosting and nesting in that location.

Use wherever birds are a menace or health hazard: outdoor cafes, food courts, building facades, ledges, roof beams, sills.

Coverage: 2-3 sq m per litre.

Any questions?
Code: BBG-1

Are you a reseller or retailer? – Click Here
Are you looking for bulk or contract pricing? – Click Here

SDS Download

Description

Bird Ban Liquid and Gel are both bird repellent products that don’t harm the birds.

Both these products are non-acidic, non-toxic coatings that are clear and are almost invisible to the naked eye. They repel common nuisance birds such as pigeons, mynahs and sparrows without doing them any harm.

Bird Ban is a tacky formulation that is uncomfortable for birds to stand on. This discomfort discourages them from perching, roosting or nesting, which in turn prevents their highly acidic droppings from damaging and contaminating property.

  • Long-lasting and weather-resistant bird repellent.
  • Apply in areas where birds are a menace or a health hazard.

Ideal for:

  • Outdoor cafes
  • Food courts
  • Building facades and ledges
  • Factory and warehouse roof beams
  • Sills and anywhere birds are a problem
 GelLiquid
Coverage:3 to 4sqm per litre.
Depending upon the absorption of the substrate.
5 to 6sqm per litre.
Depending upon the absorption of the substrate.
Temperature Range:Up to 45°CUp to 35°C
Application Method:Putty KnifePaint Brush or Roller
Last for:3-12 months depending upon bird traffic, dust and debris 3-6 months depending upon bird traffic, dust and debris
Comments.In colder climates, you may prefer our Bird Ban Liquid for its lower viscosity and easier application.

For best results, we recommend you use our Bird Droppings Remover to clean the affected area before you apply either Bird Ban product.


Related pest control products:

Testimonials

HammonCare

When I was told about the Bird Ban product it sounded like the exact product we required. Despite my reservations that the product would work, it has stopped our bird problems overnight.

I thoroughly recommend Bird Ban as a quick, effective and cost-effective way of removing your bird problems with a minimum of harm to your property or the birds themselves.

Grant Harkin
HammondCare

Directions for use

Bird Ban Gel

Dilution: Do not dilute.

Initial Application:

  1. Clean the surface to be treated, including removing bird dropping build up.
  2. Ensure the surface is dry before applying. Apply a thin layer using a putty knife or similar to level surfaces that will not exceed 40°C.
    Avoid applying the product within 10mm of the edge.
  3. Clean up with a solvent cleaner.

Reapplication:

As this product is exceptionally tacky, it will collect dust and other debris from the environment. This contamination can reduce its effectiveness over time.

  1. Use a putty knife or similar to scrape off the contaminated product.
  2. Use a solvent cleaner to remove any product that has spread into the 10mm edge area.
  3. Reapply the product in accordance with the Initial Application instructions.

Note: The product may be used on mildly sloping surfaces and in areas where surface temperatures could exceed 40°C; however, there is a risk of some unwanted spreading.


Bird Ban Liquid

Dilution:  Do not dilute.

Initial Application:

  1. Clean the surface to be treated including removing bird dropping build up.
  2. Apply a thin layer using a paintbrush, roller or similar to level surfaces that will not exceed 30°C.
    Avoid applying the product within 10mm of the edge.
    Ensure the surface is dry before applying.
  3. Clean up with a solvent cleaner.

Reapplication:

As this product is extremely tacky it will collect dust and other debris from the environment. This contamination can reduce its effectiveness over time.

  1. Use a putty knife or similar to scrape off the contaminated product.
  2. Use a solvent cleaner to remove any product that has spread into the 10mm edge area.
  3. Reapply the product in accordance with the Initial Application instructions.

Note:   The product may be used on mildly sloping surfaces and in areas where surface temperatures could exceed 30°C, however, there is a risk of some unwanted spreading.

Downloads

You may also like…

SDS Info


    Product:

    Company Name:

    First Name*:

    Last Name*:

    Phone No:

    Email:

    • Please check the that the details above are correct before submitting.
    • A link to the SDS will be sent to the email address supplied above.
    • If not received within a few minutes, please check your Junk mail.