Citrus Oil Formulation | Degreasing Chemicals

Citrus Oil Formulation

$68.00 – $680.00

Biodegradable blend of d-limonene and modified coconut extracts. D-limonene is the major component in the oils of citrus fruit and is a heavy-duty degreaser of gum, fat, bitumen, grease, oil, paint, ink, soap scum. Contains no petroleum, chlorinated solvents, harmful acids or caustics. Has a pleasant lingering orange fragrance. Safe enough for food processing, strong enough for printing and transport industries.

Clear
Code: COF Category: Tags: ,

Description

  • Biodegradable
  • Naturally derived
  • Non-corrosive
  • Heavy-duty degreaser
 
Citrus Oil Formulation is a biodegradable compound consisting of d-limonene and modified coconut extracts. D-limonene is the major component in the oils of citrus fruits and is a powerful degreaser. It dissolves greases, fats, bitumens and oils. Citrus Oil Formulation contains no harmful acids or caustics and leaves a pleasant lingering citrus fragrance. It contains no petroleum or chlorinated solvents.
 
Citrus Oil Formulation may be sprayed onto equipment prior to contact to soften and weaken the adhesion of unwanted residue.
 
Citrus Oil Formulation emulsifies with water and can therefore be rinsed off with water. It is safe for use in food processing equipment and commercial kitchens.
 
Ideal for:
  • Waste-water plumbing maintenance and grease traps
  • Tar and asphalt
  • Automotive grease and oil
  • Inks on print rollers and presses
  • Soap scum
  • Wax
  • Chewing gum

Directions for use

Read the product SDS carefully before handling this product. 

Dilutions: 
Product is ready to use. 
Cleaning of surfaces 
Remove any loose contamination. 
Apply using a mop or low-pressure sprayer. 
Agitate the surface with a soft bristle brush where necessary. 
Allow to dwell for 5 minutes, but do not allow to dry. 
Thoroughly rinse the area with water. 
Repeat steps 2 to 5 if required. 

Grease trap or clogged drains 
Pour product into the grease trap or clogged drain. The amount will vary with the application and outflow of the drain. 
Allow 20 to 30 minutes contact time and flush the line through with water, preferably hot. 

To mitigate future issues, a maintenance dose should be made to each drain leading to the grease trap. 

Note: 
See Related Products tab.

Downloads

SDS Download

You may also like…

Related products

SDS Info

    • Please check the that the details above are correct before submitting.
    • A link to the SDS will be sent to the email address supplied above.
    • If not received within a few minutes, please check your Junk mail.