Citrasolve Blend


Natural renewable-resource biodegradable solvent derived from orange peel. Quick-drying, residue-free, non-conductive and non-corrosive. Effective in dissolving grease, oils, waxes, inks, tar instantly. Can dewater and degrease electrical equipment. May be applied by spray, dip or brush.

Code: CSX Category: Tags: ,


  • Non-conductive
  • Non-corrosive
  • Non-residue
  • Quick-drying
  • Economical
Citrasolve Blend is quick-drying, residue-free, non-conductive and non-corrosive. It is used throughout the automotive, hospitality and waste management industries.
Citrasolve Blend can be used to dewater and degrease electrical equipment.
Citrasolve Blend may be applied by spray, dip or brush method. For an aerosol product with similar properties, we recommend our Citraerosol.
Ideal for:
  • Tar and asphalt
  • Grease and oil
  • Adhesives
  • Ink
  • Wax

Directions for use

Dilution: Dilution is not required.
General cleaning, including sticky or waxy residues:
  1. Apply with a microfibre cloth, sprayer or brush.
  2. Agitate with the cloth or brush if necessary.
  3. Allow to dwell for up to 5 minutes, but do not allow to dry.
  4. Rinse the area with water or a wet cloth.
Quick break degreaser:
  1. Spray or brush onto the surface.
  2. Allow to dwell for 5 to 10 minutes. Agitate if necessary.
  3. Rinse off with hot or cold water.
Electrical equipment and machinery:
  1. Isolate all electrical equipment and machinery before applying.
  2. Apply with a brush or sprayer.
  3. Allow to air-dry, then wipe with a lint-free cloth or brush clean.
  4. Ensure equipment is dry before re-establishing electrical connection.
Note: We recommend that you test first in an inconspicuous area to check suitability for the surface.
SDS Download

SDS Info

  • Please check the that the details above are correct before submitting.
  • A link to the SDS will be sent to the email address supplied above.
  • If not received within a few minutes, please check your Junk mail.